Power analyser with Ethernet and RCM

Power analyser with differential current measurement – unique in its class! UMG 96RM-E – energy, universal and differential current measurement (RCM) in one device

Show device backShow device front
Overview of all basic data

Communications options: Ethernet, Profibus, Modbus, M-Bus ...

  • Modbus (RTU, TCP, Gateway)
  • TCP/IP
  • HTTP (configurable Homepage)
  • FTP (file transfer)
  • SNMP
  • NTP (time synchronisation)
  • SMTP (email function)
  • DHCP
  • SNTP
  • TFTP
  • BACnet (optional)

 

Interfaces

  • RS485
  • Ethernet

Accuracy of measurement

  • Energy: Class 0.5 S (... / 5 A)
  • Current: 0.5 %
  • Voltage: 0.2 %

Power quality

  • Harmonics up to 40th harmonic
  • Rotary field components
  • Distortion factorTHD-U /THD-I

Networks

  • TN-, TT-, IT-networks
  • 3- and 4-phase networks
  • Up to 4 single -phase networks

Measured data memory (UMG 96RM-CBM, UMG 96RM-P)

  • 256 MB Flash

Temperature measurement

  • PT100, PT1000, KTY83, KTY84

2 digital outputs (UMG 96)

  • Pulse output kWh / kvarh
  • Switch output
  • Threshold value output
  • Logic output
  • Remote via Modbus / Profibus

3 digital inputs/outputs

  • Usable as either inputs or outputs

2 analogue inputs

  • Analogue, temperature or residual current input (RCM)

Network visualisation software

  • GridVis®-Basic (in the scope of supply)

Areas of application

  • Measurement, monitoring and checking of electrical characteristics in energy distribution systems
  • Recording of load profiles in energy management systems (e.g. ISO 50001)
  • Acquisition of the energy consumption for cost centre analysis
  • Measured value transducer for building management systems or PLC (Modbus)
  • Monitoring of power quality characteristics, e.g. harmonics up to 40th harmonic
  • Residual current monitoring (RCM)

Article number

52.22.036, 52.22.052

5222036, 5222052