Changelog 9.2.80

• MQTT diagnostic values for UMG 96-EL: Diagnostic values implemented, including a connection test for direct verification of the MQTT connection
• Event and Transient Display: Troubleshooting the Display
• JanDB: With multiple GridVis instances, access problems to the project may occur
• Support for the MSCONS standard: The current MSCONS standard in accordance with AHB 3.1g is supported
• Notice of discontinuation MySQL: No longer supporting MySQL for new projects
• Securing REST APIs: REST APIs are secured for read operations and accessible only with authentication
• Function Upgrade: New table object displays up to 100 devices and 12 measurements.
• Virtual Devices: Performance optimisation in the calculation of larger virtual devices and measuring points
• DI: Performance Optimisation
• Project Import/Export: Optimisations
• Update Jetty 12.1.7 and Spring Boot GraphQL 4.0.5
• JxBrowser Update 8.18.3

Changelog 9.2.64

• Online recording and alarm management: New online recorded values are now displayed correctly and uniquely in the tree and The “Last value” check in alarm management now works correctly for OPC and generic Modbus values.
• Web: Copying templates, dashboards, KPIs, and Sankeys in the web interface now works correctly.
• Virtual devices have been optimized and queries are now more robust.
• JxBrowser Update 8.17.1

Changelog 9.2.63

• JanDB: With multiple GridVis instances, access problems to the project may occur
• Online recording: Optimization of memory usage

Changelog 9.2.62

• UMG 800 + 801 Sequences were stored multiple times in the database
• JxBrowser Update to version 8.16.1
• Java: Update to version 25.0.2

Changelog 9.2.61

• Historical values are now updated reliably and completely after reading data from devices.
• Bugfix Historical Data: The period of the available measured values may have been calculated incorrectly

Changelog 9.2.60

• The alarm plan list now shows both time and date for entries on the current day.
• Historical VD data is now displayed completely across all time bases, even when measurement gaps are present.
• Bugfix Virtual Measuring Point: Sum value calculation
• The digital inputs (DIs) of the UMG800/801 can now be selected in the comparator.
• OPC measurement values with the same unit are now correctly recognized as a single type in the measurement analysis.
• Bugfix: Individual virtual meter groups can be selectively chosen and their energy values deleted.
• GridVis is now officially tested and approved for Windows Server 2025 and MSSQL Server 2025.
• Function Upgrade: GridVis now supports minute-level measurement data and can forward it to third-party systems such as Niotix.
• Function Upgrade: Time column in the table object can now be hidden.
• UMG 800/801: K-Factor is now visualized in GridVis and available as a measurement for UMG 800/801 with firmware 1.7.3.
• New feature for inverting module and channel order in the Virtual Meter implemented. Configuration via toggle and input field in GridVis (from firmware 1.7.3).
• Function Upgrade: Dashboard list now displays the refresh interval for live values.
• Function Upgrade: Color palette expanded. Measurement values now get distinct colors for improved clarity.
• Function Upgrade: Export files are now consistently named, regardless of storage location.
• Security Update Shiro: Update to version 2.0.6
• SQL Driver: MSSQL 13.2.1, MySQL/MariaDB 3.5.6
• Security Update Netbeans Platform: Update to version 28
• Security Update Java: Update to version 25.0.1
• JxBrowser: Update to version 8.15.0
• Jetty: Update to version 12.0.31
• Security Update Spring Boot: Update to version 3.5.9
• Aspose Cells. Update to version 25.10

Changelog 9.2.42

• Function Upgrade: when editing an export, all selected devices are listed and visible in the device selection.

Changelog 9.2.40

• Bugfix Database Actions: Speed improvement when deleting devices and historical data
• Bugfix: Custom values are with feature toggel cleaned up if too many value types are present in the generic Modbus.
• Bugfix: filename of web overview export is correct.
• Bugfix device manager: Users without permissions cannot create or delete devices.
• The existing user management is now correctly retained when a project is reloaded.
• Bugfix: the live values in old dashboards are displayed.
• Bugfix: values from OPC UA OnlineRecording are in desktop no longer saved after recording is disabled.
• Bugfix: improved performance when loading large datasets in the web version.
• Bugfix: The time is displayed correctly on the X-axis in the measured value analysis.
• Bugfix: the “Export measured values V2” function in the time range selection works correctly.
• A message now informs the user when the device structure update is not possible.
• Bugfix device manager: When adding devices in GridVis, existing names and descriptions are preserved.
• Bugfix data exports: all EMD485 counters are now available in the device selection for data exports.
• Bugfix Installer: UserDir path could be empty
• Bugfix: faster loading times for device lists.
• Bugfix project import issue with Azure SQL: Database is now correctly created with the specified server.
• The MQTT username field now supports the maximum length of 63 characters.
• Bugfix: values with the type “Energy value interval” are displayed correctly in graphs, dashboards, and tables.
• Bugfix: Duplicating VDs with custom values works correctly.
• Function Upgrade: automated email sending via Microsoft mail servers now possible using Application-Only Authentication.
• Function Upgrade: the UMG 801 now supports switching between Physical Mode and Virtual Meter Mode from firmware 1.7.3.
• Function Upgrade: Custom logo is retained in the data export folder after GridVis update.
• Function Upgrade: for additional objects, the device name is now displayed as a tooltip when hovering over the object.
• Function Upgrade: objects in dashboards can now be configured with customizable colored borders.
• Function Upgrade: in the device management, it is possible to assign a service to multiple devices at once.
• Function Upgrade: the device list shows the expiration date of the MID certification.
• Function Upgrade: the Health Center provides information about system performance.
• Security Update JxBrowser: Update to version 8.12.2
• Security Update Jetty: Update to version 12.0.25
• Security Update Spring Boot: Update to version 3.5.5

Changelog 9.2.4

• Security Update JxBrowser: Update to version 7.43.3

Changelog 9.2.0

• Bugfix Measurement selection: The user-defined channel name is displayed in the measured value tree for 801 modules.
• Bugfix Database Actions: Improved speed when deleting devices and historical data
• Bugfix List function: Column contents in the list function are still displayed if an instance is missing
• Bugfix UMG 103-CBM in VD: the energy calculation mode of the activity times has been fixed.
• Bugfix Sankey: Correction of special characters in Sankey, Ajax error message has been fixed
• Bugfix UMG800: Virtual Meter groups could show incorrect data
• Bugfix CSV import: the standard deviation has been optimised to close the gaps in the import
• Bugfix JanitzaDB: Accumulate measuring values for whole timespan
• Bugfix SQL: Events, transients and sequences could not be deleted with a database action
• Bugfix Reports: If user pages are empty, the master page is printed as the user page.
• Bugfix Device Selection: Improved latency when selecting over several thousand devices
• Bugfix for VMP: The four basic rights create, delete, edit and view can be set.
• Bugfix: active power supplied and inductive reactive power are read correctly.
• Bugfix UMG 806: Temperature and overcurrent limit are read out without errors
• Bugfix VD: VD can correctly calculate DI values with different time base values in all cases.
• Bugfix for timepoints: It is possible to set up more than 50 timepoints.
• Bugfix data export: Correction in the data export energy consumption overview, OPC client can be included in the report
• Function Upgrade Database: The 'Microsoft Azure SQL Database' is now supported as a new database type
• Function Upgrade asset management: Groups for images can be created, edited and deleted via a separate input.
• Function Upgrade device list: The current view can be exported as a CSV file.
• Function Upgrade UMG 96-PQ-L | It can be decided which partition of the device will be read out automatically
• Function Upgrade Database: Status for database health can be viewed in Health Center located in the System Settings
• Function Upgrade: In the dashboards there is an additional selection for the automatic update selection, 90 minutes, 120 minutes and Never are offered as additional options
• Function Upgrade Listfunction: The list period can also be changed temporarily with read-only rights
• Function Upgrade system info: 3rd party licenses are shown
• Function Upgrade objects: A new table object is available to clearly display the changes in the measured values
• Function Upgrade objects: Devices that have been used in objects but deleted in the GridVis central are displayed as missing in the object settings.
• Function Upgrade electricity tax application: A data export can be created in the reports area, with which the relevant consumption data for the application for electricity tax relief in accordance with 9a and 9b StromStG can be determined and exported.
• Function Upgrade UMG96-PQ-L & UMG 96-PA: Added a HTTP port to the firewall
• Function Upgrade MSCONS: A substitute value formation for gaps in the measured values of a maximum of 8x15 min is provided
• Function Upgrade Usage Statistics: Anonymized sending of usage data with declaration of consent
• Function Upgrade UMG 800: Easy Gateway support
• Function Upgrade Reports: In the Standard edition, a tab for reports is displayed and can be used.
• Function Upgrade ID-Server: The Support is able to transfer a license from his account to another account
• Function Modification CO2 and costs: Optimized value query for improved performance when displaying CO2 emissions and costs in objects.
• Function Modification: The measured value selection has a comprehensibly formulated new selection (output as)
• Function Modification device list: Some functions in the list have been moved to a new 3-point menu.
• Function Modification objects: The “Stacked line chart” object can display more values to cover a larger time range.
• Function Modification objects “Event list” and “Availability & downtime”: Modernized visual representation of the table.
• Function Modification ID-Server: Unused items can be stored in item storage
• Function Modification ID-Server: Function change ID server: Lower frequency for querying the Janitza ID server from the GridVis service
• Function Modification password entry: When using the password reset function, no distinction is made between upper and lower case when entering the e-mail address.
• Security Update user administration: To make changes in the user administration, an edit mode must be activated by entering the password of the current user.
• Security Update profile: When changing the e-mail address in your own profile, the user's current password must be entered.
• Security Update Jetty: Update to version 12.0.16
• Security Update JxBrowser: Update to version 7.42.2
• Function Termination REST API: New REST-Calls for historical/energy data, previous API is now marked deprecated