Technical details

Functions and features
Monitoring of residual current monitoring type A to B+
The two-channel residual current monitor meets the requirements of the DIN EN 62020 standard. A recurring insulation test can be omitted or at least limited. Typical places of application are the low-voltage main distribution (LVM) as well as the subdistribution boards (SSD) in grounded systems (e.g. TN-S systems). Across industries, the RCM 202-AB is a safe alternative when power interruptions due to a residual current device (RCD) or insulation resistance measurement are intolerable. Complete integration into the GridVis® software is possible. The device can be directly integrated via the RS485 interface.
Patented measurement method
Can be used as RCM at any point, e.g. DC systems, frequency converters, applications with increased fire protection requirements.
- Can be combined with any standard differential current transformer from Janitza can be combined
- Residual currents from type A to type B+
- Measurement up to 20 kHz (type B+) possible
- Accurate measurement on multiple levels
Residual current transformer
- Residual current measurement, up to 2 residual current transformers
- Measuring range AC/DC 10 mA ... 20 A
RCM Analysis
- Evaluation of AC and DC
- Harmonic spectrum up to 2 kHz, type B
- Mixed current up to 20 kHz, type A, type B+
Peripheral
- 2 analog outputs
- 2 alarm outputs
- Compatible with RCM inputs of UMG 96-RM-E & UMG 96-PA with RCM module
Patented measurement method
- Type A, B, B+ Measurement with passive residual current transformers
Historical data
- Measured value and extreme value memory with time stamp
Communication
- RS485 interface (Protocol: Modbus-RTU)
- Compatible with all Janitza Modbus master devices with communication capability
Standard-compliant according to IEC 62020
Acquisition, evaluation and monitoring of differential flows type A, B and B+
On site service
- High-resolution LCD display with intuitive operation