Back to Overview

Functions and features

Get a general overview of the most important functions of the UMG 103-CBM.

Highlights at a glance

  • Measured data recording

  • Measurement and energy data memory
    If all profiles are activated, 400,000 measured values can be saved – this represents a period of 144 days.

    Clock
    Measured data with precise timestamp

    Minimum, maximum and working values
    Saving of the minimum, maximum and working values

  • Communication

  • RS485

    • RS485 with ground connection and 3-pole plug (A, B, GND)
    • Galvanic separation incl. DC/DC converter

    Simple setting of the Modbus address
    Clear and intuitive adjustment directly on the device

  • Additional functions

  • CREST factor

    • Measurement for the power quality
    • Fail-safe operation

    Comparator

    • 2 comparator groups with 3 comparators each (A-C)
    • The results of comparators A to C can be combined with AND/OR operators (can be read out via Modbus)

Ideal for Industry 4.0 applications

  • Industry 4.0 - on the one hand this means networking and on the other hand intelligent control deep into the system field. The data collected by the sensors on the tip of the robot arm is transmitted to a development team on the other side of the world. This technology requires a power supply with the highest quality and reliability. Data processing in real-time cannot tolerate voltage dips.

    It is only logical that the energy supply is not monitored with a multitude of instruments but rather integrated in a single, modern monitoring system – just as the philosophy of Industry 4.0 advocates.

  • The UMG 103-CBM is an ideal building block for measurement data acquisition at the front line. Together with master devices (e.g. UMG 604E or UMG 96RM-E) and the GridVis® software, this allows scalable solutions to be realised. All data is logged centrally in a database and can be recorded and analysed with GridVis® . This not only saves direct costs during purchasing but also simplifies integration, training and maintenance tasks. Because all information can be called up via common, standardised interfaces, the 3-in-1 Monitoring fits perfectly into the Industry 4.0 concept.

  • Your benefits -
    8 advantages for you

    • Redundant – Maximum security for your measured data in the device memory
    • No separate supply voltage required
    • Simple setting of the Modbus address
    • Cost-effective and universally applicable
    • Simple installation – Rapid installation with Screw-type terminals
    • Saves space and costs during installation
    • Measurement device itself has a very low power footprint
    • Always up-to-date with firmware updates
    • Fig.: Typical application illustration with 2 supplies, UMG 604 as Master measurement device in the main supply and UMG 103-CBM for measuring the low voltage outputs.

Further information about the UMG 103-CBM

  • Article numbers

  • UMG 103-CBM

    Measuring voltage
    240 / 415 V AC

    5228001 (UL)

© 2024 Janitza LP. All rights reserved.