
Procont®
Load and energy management controller
The ideal solution for a wide range of requirements in the fields of e-mobility, photovoltaics, batterystorage deploymentoptimization and peakloadmanagement.
Communication
Mounting
Memory
In- and outputs
Measurement accuracy
Power quality
RCM
Certifications
Modularity
Procont®
The ideal solution for a wide range of requirements in the fields of e-mobility, photovoltaics, batterystorage deploymentoptimization and peakloadmanagement.
The UMG 96-PQ-L extends the 96 series with useful functions for power quality analysis and is characterized by the innovative memory structure, which enables long data retention.
UMG 96-PA Energy measurement device UMG 96-PA The energy measurement device UMG 96-PA combines four functions in one device and can be modularly expanded by two analogue inputs.
The UMG 96-PA-MID+ has all the advantages of the UMG 96-PA-series as well as MID-certification and other features, such as tamper-proof installation.
The RCM 201-ROGO enables continuous monitoring of TN-S systems and comply with DIN EN 62020/VDE 0663/IEC 62020.
The two-channel residual current monitoring device meets the requirements of the DIN EN 62020 standard. A recurring insulation test can be omitted or at least limited.
The UMG 801 offers various communication interfaces and enables direct data transmission via OPC UA to higher-level systems. The RD 96 extension adds operating convenience and additional safety at the control cabinet.
Compact and economical - modular din-rail measurement device with residual current measurement. Continuous monitoring of the residual current enables dangerous fault currents to be detected at an early stage, thereby avoiding damage to the system as well as production downtimes.
The Janitza UMG 512-PRO is particularly well suited to the monitoring of power quality in accordance with current standards, e.g. EN 50160, IEEE519 or EN 61000-2-4.
The multi-purpose unit for integration into control panels. Continuous monitoring of the power quality, analysis of electrical interference in the event of network problems.
The new UMG 96-S2 is suitable for measuring and controlling electrical variables and energy consumption as well as for monitoring the power quality parameters, such as harmonics.
The communications professional: multifunctional power measurement device with PROFINET interface
Power analyser with differential current measurement – unique in its class! UMG 96RM-E – energy, universal and differential current measurement (RCM) in one device.
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
Multifunction measurement device, transients recorder, meter (kWh, kvarh), peak load optimisation, harmonics analyser, PLC, state monitoring, event plotter, data logger.
Multifunction measurement device, transients recorder, meter (kWh, kvarh), peak load optimisation, harmonics analyser, PLC, state monitoring, event plotter, data logger.
20 Channel Branch Circuit Monitoring Device with RCM.
Energy meter for DIN rails, with clock, battery and memory that is suitable for the measurement and checking of electrical characteristics, the energy consumption and for monitoring the power quality, e.g. harmonics.
Whether electricity or water – gas, steam or pressure: The ProData datalogger captures and saves all consumption and process data as well as status messages (e.g. switch settings).
Energy meters are measurement devices that determine Measured value like effective energy, reactive energy, effective power and reactive power.
The first step towards saving energy and improving operational processes is the measurement of the most important parameters of your electrical energy supply while monitoring the peak loads.
Janitza® offers you a complete range of power monitoring units with the corresponding accessories - The UMG Series. These equipments and power analysers help you gain a comprehensive overview of your energy supplies and introduce the correct measures. The power quality is also monitored according to the general valid standards (e.g. EN50160).